Netgear AirCard 875 (all others) Guida Utente Scaricare il pdf (Pagina 49)

Modem Status, Customization, and Reset Commands

Rev 2.8.1 Feb.11 49

!SWICALLPROG?

!SWICALLPROG

=<cpnStatus>

Supporting modems:

• All

Enables / disables Call Progress Notification

This command is used to enable or disable call progress notification. This

allows the host to receive call status updates such as type of call, answered,

on hold, etc.

Usage:

• AT!SWICALLPROG? returns the current <cpnStatus>.

• AT!SWICALLPROG=<cpnStatus> Information on current calls is returned,

when the call status changes, in the format:

!SWICALLPROG:<idx

>,<dir>,<stat>,<mode>,<mpty>,<number>,<type>,

<alpha>

!SWICALLPROG:<idx

>,<dir>,<stat>,<mode>,<mpty>,<number>,<type>,

<alpha>

...

Note: When call progress notification is enabled, the standard AT command

+CLCC (List Current Calls) is disabled.

Parameters:

<cpnStatus> (Call progress notification status):

• 0 = Disabled

• 1 = Output on AT channel if AT is not blocked

• 2 = Output on AT channel even if AT is blocked

• Any other value will return an ERROR response

<idx> (Call identification number):

• Integer value as described in GSM 02.30 Section 4.5.5.1

• Can be used in +CHLD command

<dir> (Call direction):

• 0 = Mobile-originated (MO)

• 1 = Mobile-terminated (MT)

<state> (Call state):

• 0 = Active

• 1 = Held

• 2 = Dialing (MO calls)

• 3 = Alerting (MO calls)

• 4 = Incoming (MT calls)

• 5 = Waiting (MT calls)

• 6 = Disconnected

<mode> (Bearer / teleservice):

• 0 = Voice

• 1 = Data

• 2 = Fax

(Continued on next page)

Table 3-2: Modem status, customization, and reset commands (Continued)

Command Description

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Commenti su questo manuale

Nessun commento

Netgear AirCard 875 (all others) Guida Utente Pagina 49

Commenti su questo manuale

Prodotti e manuali riguardandi Materiale per rete wireless per cellulari Netgear AirCard 875 (all others)