Netgear WPN511 Manuale Utente Scaricare il pdf (Pagina 29)

NETGEAR RangeMax Wireless PC Card WPN511 User Manual

2-7

v3.0, January 2007

4. Verify wireless connectivity to your network.

Verify connectivity by using a browser such as Netscape or Internet Explorer to connect to the

Internet, or check for file and printer access on your network.

You can check the status bar in the Smart Wizard for the current connection status.

Setting up a Computer-to-Computer (Ad Hoc) Profile

The Computer-to-Computer setting uses Ad Hoc mode. Ad Hoc mode is an 802.11 networking

framework in which devices or computers communicate directly with each other, without the use

of an access point. For example, this mode is used when two Windows computers are configured

with file and print sharing enabled and you want to exchange files directly between them.

Follow the instructions below to create an Ad Hoc mode profile.

Note: If you cannot connect, see Chapter 4, “Troubleshooting. Also, for problems

with accessing network resources, the Windows Client and File and Print

Sharing software might not be installed and configured properly on your

computers. Refer to “Internet Networking and TCP/IP Addressing” on

page B-1.

Note: Ad Hoc mode will not work using DHCP settings. Ad Hoc mode requires either

static IP addresses (such as

192.168.0.1) or the IPX protocol. For instructions on

setting up static IP addresses on a Windows PC, refer to the PC Networking

Tutorial included on the NETGEAR CD.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Nessun commento

Netgear WPN511 Manuale Utente Pagina 29