Netgear 771S Manuale Utente Scaricare il pdf (Pagina 14)

AirCard 77Xs/34xU AT Command Reference

14 Proprietary and Confidential 4114487

Command reference

Table 2-2: AT command password details

Command Description

!ENTERCND

Enable access to password-protected commands

Before you can use any password-protected AT commands, you must enter the password

correctly using this command. The initial password (“A710”) is configured onto the modem

during manufacture. You can change the password using !SETCND.

Once the password has been entered correctly, the password-protected AT commands are

available until the modem is reset or powered off and on.

Password required: Yes—Query format only.

Usage:

• Execution: AT!ENTERCND=<“key”>

Response:

Purpose: Unlock password-protected commands.

• Query: AT!ENTERCND?

Response:

<key> (if unlocked)

Purpose: This command is password-protected. After entering the password correctly

using the execution operation (“=”), you can use this command to display

the password as a reminder.

Parameters:

<“key”> (Password stored in NV memory)

• Password must be entered with quotation marks. (For example,

AT!ENTERCND=”ExamplePW”.)

• Password length: 4–10 characters (0–9, A–Z, upper or lower case)

• Characters may be entered in ASCII format, or in Hex format. (For example:

“myPass3” or “ABCDEF01234”.)

!SETCND

Set AT command password

Change the password used for the !ENTERCND command. (Before you can change the

password using !SETCND, you must enable access to this command using !ENTERCND.)

Password required: Yes

Usage:

• Execution: AT!SETCND=<“key”>

Response:

Purpose: Sets <“Key”> as the new password for accessing protected commands.

Parameters:

<“key”> (New password)

• Password must be entered with quotation marks (for example,

AT!SETCND=”NewPW”).

• Password length: 4–10 characters (0–9, A–Z, upper or lower case)

• Characters may be entered in ASCII format, or in Hex format. (For example:

“myPass3” or “ABCDEF01234”.)

Warning: Do NOT enter a null password (that is, the <“Key”> cannot be ““) — you will NOT

be able to use password-protected commands, and will have to contact NETGEAR for help to

reset the password.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Commenti su questo manuale

Nessun commento

Netgear 771S Manuale Utente Pagina 14

Commenti su questo manuale