Netgear PROSAFE WG302v2 Manuale Utente Pagina 34
- Pagina / 102
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
2-12 Basic Installation and Configuration
v1.0, May 2006
– If you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is five channels (for example, use channels 1 and 6, or 6 and 11).
– In “Infrastructure” mode, wireless stations normally scan all channels, looking for an
access point. If more than one access point can be used, the one with the strongest signal is
used. This can only happen when the access points use the same SSID.
To learn more about wireless channels, see Appendix A, “Related Documents for information
about online resources.
• Data Rate. Shows the available transmit data rate of the wireless network. The default is Best.
• Output Power. Set the transmit signal strength of the access point (AP). The options are Full,
Half, Quarter, Eighth, and Min. Decrease the transmit power if two or more APs are close
together and use the same channel frequency. The default is Full.
Understanding WG302v2 Wireless Security Options
Your wireless data transmissions can be received well beyond your walls by anyone with a
compatible adapter. For this reason, use the security features of your wireless equipment. The
ProSafe 802.11g provides highly effective security features which are covered in detail in this
chapter. Deploy the security features appropriate to your needs.
There are several ways you can enhance the security of your wireless network:
• Restrict Access Based on MAC address. You can restrict access to only trusted PCs so that
unknown PCs cannot wirelessly connect to the WG302v2. MAC address filtering adds an
obstacle against unwanted access to your network, but the data broadcast over the wireless link
is fully exposed.
• Turn Off the Broadcast of the Wireless Network Name (SSID). If you disable broadcast of
the SSID, only devices that have the correct SSID can connect. This nullifies the wireless
network ‘discovery’ feature of some products such as Windows XP, but the data is still fully
exposed to a determined person using specialized test equipment like wireless sniffers.
• Use WEP. Wired Equivalent Privacy (WEP) data encryption provides data security. WEP
Shared Key authentication and WEP data encryption will block all but the most determined
eavesdropper.
• Use IEEE 802.1x. IEEE 802.1x is the standard for passing the Extensible Authentication
Protocol (EAP) over an 802.11 wireless network using a protocol called EAP Encapsulation
Over LANs (EAPOL). This is a newer, more secure standard than Static WEP.
- NETGEAR ProSafe 1
- 802.11g Wireless Access 1
- Point WG302v2 1
- Reference Manual 1
- Radio Frequency Notice 2
- FCC Statement 3
- Channels: 1 to 13 7
- Contents 9
- About This Manual 13
- How to Use This Manual 14
- How to Print this Manual 14
- About This Manual xv 15
- Chapter 1 17
- Introduction 17
- WG302v2 Key Features 18
- Introduction 1-3 19
- What’s In the Box? 20
- Hardware Description 21
- Rear Panel 22
- Chapter 2 23
- Figure 2-1 26
- Figure 2-2 27
- Figure 2-3 29
- Figure 2-4 29
- Basic IP Settings 30
- Wireless Settings 32
- Configuring Security Profiles 35
- Figure 2-7 36
- Profile Definition 37
- Network Authentication 37
- Data Encryption 38
- Figure 2-8 42
- Figure 2-9 44
- Chapter 3 45
- Management and Information 45
- Remote Management 46
- Figure 3-3 47
- CLI Commands 48
- Configuration File Management 49
- Erasing the Configuration 50
- Viewing General Information 51
- Viewing the Activity Log 53
- Figure 3-7 54
- Viewing Statistics 55
- Rogue AP Detection 56
- Figure 3-9 57
- Chapter 4 59
- Advanced Configuration 59
- 4-2 Advanced Configuration 60
- Configuring Hotspot Settings 61
- 4-4 Advanced Configuration 62
- Figure 4-3 62
- Advanced Configuration 4-5 63
- 4-6 Advanced Configuration 64
- Advanced Configuration 4-7 65
- 4-8 Advanced Configuration 66
- Figure 4-4 66
- Advanced Configuration 4-9 67
- Figure 4-5 67
- 4-10 Advanced Configuration 68
- Figure 4-6 68
- Advanced Configuration 4-11 69
- 4-12 Advanced Configuration 70
- Figure 4-7 70
- Advanced Configuration 4-13 71
- 4-14 Advanced Configuration 72
- Chapter 5 73
- Troubleshooting 73
- The LAN light is not lit 74
- Troubleshooting 5-3 75
- 5-4 Troubleshooting 76
- Appendix A 77
- Related Documents 77
- A-2 Related Documents 78
- Appendix B 79
- Specifications 79
- B-2 Specifications 80
- Specifications B-3 81
- B-4 Specifications 82
- Appendix C 83
- Command Line Reference 83
- Keyboard Shortcuts 84
- Interface Naming Conventions 85
- Entering CLI Commands 86
- Command Line Reference C-5 87
- Configuring Basic Settings 89
- Configuring Wireless Settings 90
- C-10 Command Line Reference 92
- Command Line Reference C-11 93
- RADIUS Server Settings 94
- Access Control 95
- C-14 Command Line Reference 96
- Table C-12 AP Management 96
- Command Line Reference C-15 97
- Table C-13 AP Information 97
- C-16 Command Line Reference 98
- Advanced Wireless Settings 99
- Hotspot Settings 99
- Command Line Reference C-19 101
- C-20 Command Line Reference 102
Prodotti e manuali riguardandi Punti d’accesso WLAN Netgear PROSAFE WG302v2
Punti d’accesso WLAN Netgear DG834G Manuale Utente
(166 pagine)
(166 pagine)
Punti d’accesso WLAN Netgear WG102 Manuale Utente
(134 pagine)
(134 pagine)
Punti d’accesso WLAN Netgear WNDAP330 Guida Utente
(142 pagine)
(142 pagine)
Pfister 016-FE0K manuály
Uživatelské manuály a uživatelské příručky pro Příslušenství pro vodu Pfister 016-FE0K.
Poskytujeme 1 manuály pdf Pfister 016-FE0K ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commenti su questo manuale