Netgear WAG102 Manuale Utente Pagina 68
- Pagina / 102
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
3-4 Management
v2.0, September 2006
VLAN (802.1Q) This option is only useful if the hubs/switches on your LAN support the
VLAN (802.1Q) standard. If so, you can enable this feature, and define the
VLAN IDs used for management and each security profile. The feature is
enabled in the Basic Settings menu.
Management VLAN ID If 802.1Q is enabled, this ID indicates the VLAN ID for management
connections and traffic to and from this access point. This VLAN ID must be
recognized, and handled appropriately, by other network devices.
Current IP Settings
IP Address The IP address of the wireless access point.
Subnet Mask The subnet mask for the wireless access point.
Default Gateway The default gateway for the wireless access point communication.
DHCP Client Enabled indicates that the current IP address was obtained from a DHCP
server on your network. Disabled indicated a static IP configuration.
Current Wireless Settings 11a
Access Point Mode Identifies the operating mode of the WAG102: Access Point, Point-to-point
bridge, Multi-point bridge or Repeater.
Operating Mode Identifies the 802.11 operating mode of the WAG102.
Channel/Frequency Identifies the channel the wireless port is using. 52 is the default channel
setting. (Channel frequencies used on each channel can be found in
“Wireless Communications”; a link to this article is in Appendix B, “Related
Documents
”.).
Security Profiles There can be up to 8 profiles enabled, each with its own profile name, SSID,
security type, and VLAN ID.
Current Wireless Settings 11b/g
Access Point Mode Identifies the operating mode of the WAG102: Access Point, Point-to-point
bridge, Multi-point bridge or Repeater.
Operating Mode Identifies the 802.11 operating mode of the WAG102.
Channel/Frequency Identifies the channel the wireless port is using. 11 is the default channel
setting. (Channel frequencies used on each channel can be found in
“Wireless Communications”; a link to this article is in Appendix B, “Related
Documents
”.)
Security Profiles There can be up to 8 profiles enabled, each with its own profile name, SSID,
security type, and VLAN ID.
Table 3-1. General Information Fields (continued)
Field Description
- NETGEAR ProSafe Dual 1
- Band Wireless Access 1
- Point WAG102 Reference 1
- Manual (802.11a/g) 1
- FOR HOME OR OFFICE USE 2
- FCC Statement 3
- European Community 5
- Contents 9
- 2.0, September 2006 12
- About This Manual 13
- How to Use This Manual 14
- How to Print this Manual 15
- Introduction 17
- Chapter 1 17
- Key Features and Standards 18
- Key Features 19
- 1-4 Introduction 20
- System Requirements 21
- What’s In the Box? 22
- Hardware Description 23
- Rear Panel 24
- 4. RJ-45 Ethernet Port 25
- 1-10 Introduction 26
- Chapter 2 27
- 0RO3AFE7IRELESS!CCESS0OINT 29
- Figure 2-2 31
- Figure 2-3 32
- Figure 2-4 33
- Figure 2-5 35
- Figure 2-6 35
- Figure 2-7 37
- Setting Basic IP Options 38
- Wireless Settings 40
- Figure 2-10 42
- Figure 2-11 45
- Figure 2-12 52
- Setting up a Security Profile 53
- Figure 2-14 54
- Figure 2-15 56
- Figure 2-16 57
- Figure 2-17 58
- Figure 2-18 59
- Figure 2-19 60
- Figure 2-20 61
- Figure 2-21 62
- Figure 2-22 64
- Chapter 3 65
- Management 65
- 3-2 Management 66
- Figure 3-2 66
- Management 3-3 67
- 3-4 Management 68
- Management 3-5 69
- Figure 3-3 69
- 3-6 Management 70
- Figure 3-4 70
- Management 3-7 71
- Table 3-1. Statistics Fields 71
- 3-8 Management 72
- Figure 3-5 72
- Management 3-9 73
- Figure 3-6 73
- Configuration File Management 74
- Management 3-11 75
- 3-12 Management 76
- Figure 3-8 76
- Chapter 4 77
- Advanced Configuration 77
- 4-2 Advanced Configuration 78
- Figure 4-2 78
- Advanced Configuration 4-3 79
- 4-4 Advanced Configuration 80
- Figure 4-3 80
- Advanced Configuration 4-5 81
- Figure 4-4 81
- 192.168.0.1 82
- Hub or Switch 82
- Advanced Configuration 4-7 83
- Segment 1 84
- Advanced Configuration 4-9 85
- 4-10 Advanced Configuration 86
- Chapter 5 87
- Troubleshooting 87
- The LAN light is not lit 88
- Troubleshooting 5-3 89
- 5-4 Troubleshooting 90
- Appendix A 91
- Technical Specifications 93
- Appendix B 95
- Related Documents 95
- B-2 Related Documents 96
- Numerics 97
Prodotti e manuali riguardandi Punti d’accesso WLAN Netgear WAG102
Punti d’accesso WLAN Netgear 802.11g Manuale Utente
(108 pagine)
(108 pagine)
Punti d’accesso WLAN Netgear WG602v2 Guida Utente
(122 pagine)
(122 pagine)
Punti d’accesso WLAN Netgear MP115 Guida Utente
(78 pagine)
(78 pagine)
Punti d’accesso WLAN Netgear WAG302v1 Manuale Utente
(108 pagine)
(108 pagine)
© 2020, manymanuals.it. Tutti i diritti riservati | 0.962 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale