Netgear WNDAP330 Guida Utente Pagina 74

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 73
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-4 Management
v1.0, May 2008
Baud rate: 9600 bps
Data bits: 8
Parity: none
•Stop bit: 1
Flow control: none
These settings appear below the connector on the back panel.
3. Press Enter. The screen shown below in Figure 3-3 should appear.
4. Enter the login name and password (admin and password are the defaults).
After successful login, the <Access Point Name> prompt should appear. In this example, the
prompt is netgear74F35E.
5. Enter help to display the CLI command help.
CLI Commands
The CLI commands are listed in Appendix C, “Command Line Reference.”
Figure 3-3
Vedere la pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 141 142

Commenti su questo manuale

Nessun commento