Netgear WG311T Manuale Utente Scaricare il pdf (Pagina 30)

NETGEAR 108 Mbps Wireless PCI Adapter WG311T User Manual

2-8

v5.0, January 2007

b. Select or enter the Network Name (SSID) for the Ad Hoc network.

c. In the Profile box, type the name of the profile.

d. Click Apply.

3. Save your settings in a Profile.

a. Click the Save Profile button.

All the configuration settings are saved in this profile.

b. Click Apply.

c. Click Close to exit the Smart Wizard, or Cancel to return to the previous settings.

4. Configure the PC network settings.

a. Configure each PC with either a static IP address or with the IPX protocol.

b. Restart the PCs.

5. Use the Ping program to verify wireless connectivity between your peer devices.

a. On the Windows taskbar click the Start button, and then click Run.

b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type

ping -t 192.168.0.1 and then click OK.

Note: For instructions on configuring static IP addresses, refer to the networking

tutorial on your NETGEAR 108 Mbps Wireless PCI Adapter WG311T Resource

CD.

Figure 1-11

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 47 48

Nessun commento

Netgear WG311T Manuale Utente Pagina 30