Netgear XSM7224S Manuale Utente Pagina 125

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 579
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 124
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-84
v1.0, November 2010
storm-control broadcast rate
Use this command to configure the broadcast storm recovery threshold for an interface in packets
per second. If the mode is enabled, broadcast storm recovery is active, and if the rate of L2
broadcast traffic ingressing on an interface increases beyond the configured threshold, the traffic is
dropped. Therefore, the rate of broadcast traffic is limited to the configured threshold.
no storm-control broadcast rate
This command sets the broadcast storm recovery threshold to the default value for an interface and
disables broadcast storm recovery.
storm-control broadcast (Global)
This command enables broadcast storm recovery mode for all interfaces. If the mode is enabled,
broadcast storm recovery is active, and if the rate of L2 broadcast traffic ingressing on an interface
increases beyond the configured threshold, the traffic will be dropped. Therefore, the rate of
broadcast traffic will be limited to the configured threshold.
no storm-control broadcast
This command disables broadcast storm recovery mode for all interfaces.
Default 0
Format storm-control broadcast rate <0-14880000>
Mode Interface Config
Format no storm-control broadcast rate
Mode Interface Config
Default disabled
Format storm-control broadcast
Mode Global Config
Vedere la pagina 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 578 579

Commenti su questo manuale

Nessun commento